Bellhousings

Bellhousings rigid and damped

• Connection elements between IEC electric and petrol motor and hydraulic pump
• Available for nearly all hydraulic pumps ex stock at short notice
• Rigid and noise absorbing model according to VDMA 24561
• Standard bellhousings made of aluminium
• Bellhousings made of steel are available in all dimensions at short notice
• For simple selection of the required bellhousing and coupling type, a free of charge calculation programme is available online

NEMA Adaptor

• Adapter for NEMA motors (U.S. standard) in conjunction with standard bellhousings

Foot brackets

• Aluminium foot brackets for the horizontal installation of motor-bellhousing-pump
• Enables separate assembly/disassembly of motor and pump

Damping rods

• Applied to reduce noise and dampen vibrations
• Finish-worked for IEC and NEMA motors and foot brackets available ex stock

Damping flanges

• Damping flanges are used in conjunction with aluminium or steel bellhousings as well as pump brackets
• No metallic bonding of the two vulcanised flange surfaces
• Sound level reduction up to 8 dB (A)
• Motor oil aluminium / Perbunan Aluminium

Damping rings

• With V1 design, application between bellhousing and oil tank cover or between bell housing and foot bracket with IMB 5 design
• No metallic bonding of the two vulcanised assembly flanges
• Noise reduction of approx. 3–5 dB (A)

Mounting flanges

• Simplified assembly/disassembly of the drive unit motor/pump incl. pressure line with V1 design

Gaskets

• Gaskets made from rubberised cork for bell housings, assembly flanges and gear pumps

Download

Catalog (PDF 3.3 MB, Updated: 09/10)
Operating and Mounting Instructions (PDF 443 KB, Updated: 06/09)