Tank heater

General information

• Standard devices of 0.25 kW–5 kW available
• Devices for EX-protection and special devices on request
• A calculation programme for determination of the required tank heater is available on request

Field of application
Preheating of hydraulic oil on mineral basis for a fast reaching of the operating temperature at hydraulic units. The optimum viscosity decreases the wear of the hydraulic components.

Series VR

Immersion heaters with magnetic clamp, no mounting effort, ideal solution to retrofit existing installations. Protection IP 68. Integrated thermostat with switch-off temperature 40°C (standard).

Series PTHK 90

Cartridge screwed-in tank heater with tube insert. Protection IP 65. This type of heating insert can be changed without evacuation of the oil tank.
Screwed thread G 1 1/2“ and G 2“.

Series PTHK 91 TH

Cartridge screwed-in tank heater with temperature adjustment, external or internal regulation. Standard adjustable 0°C up to 85°C. Protection IP 54. This type of heating insert can be changed without evacuation of the oil tank.
Screwed thread G 2“.

Series RHK

Tube screwed-in heater, protection IP 54.
Screwed thread G 1 1/2“.

Series RHK-TH

Tube screwed-in heater with temperature adjustment, external or internal regulation. Standard adjustable 0° C up to 85°.
Protection IP 54. Screwed thread G 1 1/2“.

Download

Catalog (PDF 1.75 MB, Updated: 03/08)